27th June, 2023

The A-Z Of Health And Safety Acronyms And Abbreviations

In health and safety, every other sentence seems to contain an acronym or abbreviation. Some words and phrases are just easier to remember if you shorten them down to a few letters. But if you're lost in the lingo when asked for your RAMS on the ACM's required in the CDM CPP, this guide will help.

The A-Z Of Health And Safety Acronyms And Abbreviations header image

A

ACM - Asbestos Containing Material
The term asbestos-containing material (ACM) describes any material that contains asbestos and should be considered hazardous.

ACoP - Approved Code of Practice
Most health and safety regulations also have an approved code of practice produced by the HSE. ACoPs give practical advice on how to comply with the law and have a special legal status.

ALARP - As Low As Reasonably Practicable
ALARP is short for as low as reasonably practicable. If you look at health and safety regulations, you will often find the term so far as is reasonably practicable. These two terms generally mean the same thing. See also, SFAIRP.

C

CAR - Control of Asbestos Regulations
This set of health and safety regulations applies to asbestos materials, covering asbestos management, work, and training.

CDM - Construction (Design & Management) Regulations
The Constriction (Design & Management) Regulations (CDM) are a set of health and safety regulations that apply to all construction work in Great Britain. See also, CPP, PCI, and HSF.

CHAS - Contractors Health and Safety Assessment Scheme
CHAS is a health and safety accreditation scheme for the construction industry. Contractors can apply to be assessed and approved under the CHAS assessment scheme.

CLP - Classification, Labelling and Packaging of Substances and Mixtures
The EU (and now GB) duties to classify, label and package substances for sale.

COSHH - Control of Substances Hazardous to Health Regulations
COSHH is a legal requirement for employers to control substances that are hazardous to health, including assessing, preventing harm, control measures, instruction and training, monitoring, health surveillance and planning for emergencies.

CPP - Construction Phase Plan
The construction phase plan is a document required for every construction project under CDM. See also, CDM.

D

dB(A) - Decibel (A-weighted)
A-weighted is an approximation of how the human ear perceives the noise. Used in noise exposure action and limit values.

dB(C) - Decibel (C-weighted)
C-weighting is more commonly used for measuring peak measurements. Used in noise exposure action and limit values.

DSE - Display Screen Equipment
Types of display screen equipment include PCs, laptops, tablets and smartphones. The Health and Safety (Display Screen Equipment) Regulations apply to workers who use DSE daily, for an hour or more at a time.

DSEAR - Dangerous Substances and Explosive Atmospheres Regulations
A health and safety law requiring employers to control the risks to safety from fire, explosions and substances corrosive to metals.

E

EAV - Exposure Action Value
The EAV is a value set in regulations, such as The Control of Vibration at Work Regulations, above which you must take action.

ELV - Exposure Limit Value
The ELV is a value set in regulations, such as The Control of Vibration at Work Regulations, that you must not exceed.

H

H&S - Health and Safety
Yes, there's even an acronym for health and safety itself!

HASWA / HSW - Health and Safety at Work etc. Act
The Health and Safety at Work etc. Act sets out the general health and safety duties that all businesses have to comply with in the UK. It enables further, more specific, health and safety regulations to be passed by law and enforced under it.

HAVS - Hand Arm Vibration Syndrome
Nearly 2 million people in the UK are at risk from HAVS. Caused by vibration exposure, it's a painful and disabling condition that's permanent - but preventable. See also, VAWR, WBV.

HSE - Health and Safety Executive
Britain's national regulator for workplace health and safety. The HSE provides guidance, controls licensing, inspects, investigates and enforces health and safety laws.

HSF - Health and Safety File
The health and safety file is a document required on most construction projects under CDM. See also, CDM.

I

IOSH - Institution of Occupational Safety and Health
IOSH is the Chartered body and leading membership organisation for safety and health professionals.

L

LEV - Local Exhaust Ventilation
Local exhaust ventilation is a type of equipment used to control and extract dust and fumes from the workplace.

LITE - Load, Individual, Task, Environment
LITE is an acronym used to remember the key areas to assess in a manual handling assessment. See also, TILE.

LOLER - Lifting Operations and Lifting Equipment Regulations
If you own, operate or control lifting equipment, these regulations apply. LOLER requires that lifting equipment is suitable and regularly inspected and that lifting operations are safely planned and controlled.

M

MHSWR - Management of Health and Safety at Work Regulations
This set of regulations applies to every workplace and every employer. The regulations reinforce the general duties under the 1974 Act and add additional requirements. See also, HASWA.

N

NEBOSH - National Examination Board in Occupational Safety and Health
NEBOSH is a UK-based examination board offering qualifications and courses in health, safety, environment and well-being management.

O

O&M Manual - Operation & Maintenance Manual
The O&M manual contains information on the operation and maintenance of the building. Often supplied with the health and safety file. See also, HSF.

P

PAT - Portable Appliance Testing
The examination and testing of electrical appliances and equipment at regular intervals to ensure they are safe to use.

PCI - Pre-Construction Information
The pre-construction information is a document required on construction projects under CDM. See also, CDM.

PPE - Personal Protective Equipment
Usually, this type of equipment gets worn by the user - like hard hats, gloves, safety boots, goggles, aprons, hi-viz, harnesses, face shields etc. PPE is used to protect the person from harm.

PUWER - Provision and Use of Work Equipment Regulations
PUWER requires that equipment is safe, suitable, maintained, inspected and installed correctly. The law also requires that the equipment is used safely and only by competent people.

R

RAMS - Risk Assessments and Method Statements
RAMS stands for two types of health and safety documents, that are often found together - Risk Assessments and Method Statements.

RCD - Residual Current Device
An RCD is a sensitive safety device that switches off electricity automatically if there is a fault. Used as a control to reduce the risk of electric shock and protect installations against fire.

RCS - Respirable Crystalline Silica
Respirable crystalline silica (also known as silica dust) is created when building products containing silica are cut, drilled or otherwise worked on. Silica dust is harmful to your health.

REACH - Registration, Evaluation, Authorisation and Restriction of Chemicals
Under REACH, companies need to identify and manage the risks created by the substances they manufacture and market.

RIDDOR - Reporting of Injuries, Diseases and Dangerous Occurrences Regulations
RIDDOR covers the legal requirements for reporting specific injuries, including fatal, major and over 7-day, plus diseases and dangerous events at work.

RPE - Respiratory Protective Equipment
RPE includes masks, hoods, helmets, suits, and other respirators or breathing apparatus worn to filter out contaminants in the air. RPE can also be used to supply clean air to the user.

RRFSO - Regulatory Reform (Fire Safety) Order
Legislation covering fire precautions, responsibilities, duties, assessment, fighting, detection, training and emergency planning.

S

SFAIRP - So Far As Is Reasonably Practicable
It's a legal duty of every employer to ensure health safety and welfare - so far as is reasonably practicable. See also, ALARP.

SSIP - Safety Schemes in Procurement
SSIP is an umbrella body for assessment schemes. If you have health and safety accreditation from SSIP members such as CHAS, Acclaim or Safe Contractor, you have satisfied the criteria for all other SSIP member schemes.

STEL - Short-Term Exposure Limits
Short-term exposure limits are a type of workplace exposure limit that apply to short-term exposure (usually a 15-minute reference period). See also, WEL, TWA.

SWL - Safe Working Load
Marked on lifting equipment, the safe working load is a maximum load that you should not exceed. See also, LOLER.

T

TBT - Toolbox Talk
Toolbox talks are short safety discussions. They usually happen on the job and are focused on a single safety topic. Here are 30 free toolbox talks.

TILE - Task, Individual, Load, Environment
TILE is an acronym used to remember the key areas to assess in a manual handling assessment. See also, LITE.

TWA - Time Weighted Average
Workplace exposure limits will often be averaged over a specified period of time, referred to as a time-weighted average (TWA). See also, STEL, WEL.

V

VAWR / Vibration Regs - Control of Vibration at Work Regulations
The law for protecting workers from risks to their health and safety from vibration. The regulations introduce action and limit values for hand-arm and whole-body vibration. See also, HAVS, WBV.

W

WBV - Whole Body Vibration
Whole-body vibration is the jolting or shaking of the body, usually experienced through sitting or standing on a moving surface. For example, operating impacting machinery or driving on an unmade road. See also, VAWR, and HAVS.

WAHR / Height Regs - Work at Height Regulations
Employers and those in control of any work at height activity must make sure work is properly planned, uses the right type of equipment, and is supervised and carried out by competent people.

WEL - Workplace Exposure Limit
Under the COSHH regulations, workplace exposure limits (WELs) are assigned to many hazardous substances. WELs should not be exceeded.


We will add any new abbreviations to this post as we use them throughout our guides and articles. If you're unsure what any other health and safety acronyms mean that we haven't covered here, get in touch!

share on twitter share on facebook share on linked in share by email

This article was written by Emma at HASpod. Emma has over 10 years experience in health and safety and BSc (Hons) Construction Management. She is NEBOSH qualified and Tech IOSH.

Better health and safety...

We are here to help you and your business put safety in everything.

Learn More

Recent posts like this...

How To Measure Health And Safety Performance image

How To Measure Health And Safety Performance

How do you measure health and safety performance? Usually, we are looking for zero. Zero accidents, zero ill health, zero harm. When we measure by accidents, we are measuring failure. But you can also measure health and safety success.

Read Post
4 Common Reasons For Underreporting In Health And Safety image

4 Common Reasons For Underreporting In Health And Safety

Underreporting can leave you blind to health and safety issues and incidents in your business. But why do people stay silent when bad things happen? Here are common reasons for underreporting in health and safety (and how to fix them).

Read Post
Why Health And Safety Is NOT Your Number One Priority image

Why Health And Safety Is NOT Your Number One Priority

Is health and safety the number one priority for any business? Probably not. Of course, health and safety is an important aspect of running your business, but it's not your number one priority. Find out why.

Read Post

Spend less time on paperwork.
Start with the free plan today.